Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Korg stage piano - 1 key sounding at max velocity.

  • 10-03-2009 8:08pm
    #1
    Registered Users, Registered Users 2 Posts: 168 ✭✭


    Does anyone know how easy it is to fix a key that is constantly sounding at full velocity on a Korg SP200 stage piano (weighted keys). I'm playing the piano for a college production but the problematic triple forte E appears in a number of pieces & is quite disconcerting for me & no doubt the audience when the run begins.

    Any suggestions very welcome.

    www.jjvernon.com


Comments

  • Closed Accounts Posts: 6,408 ✭✭✭studiorat


    JJV wrote: »
    Any suggestions very welcome.

    Just play the others louder. ;o)


  • Registered Users, Registered Users 2 Posts: 801 ✭✭✭PMI


    Have you had it apart yet? and looked for obvious shorts or anything


  • Registered Users, Registered Users 2 Posts: 7,790 ✭✭✭PaulBrewer


    Just call Korg!


  • Closed Accounts Posts: 38 dfkorg


    Contact Korg UK at

    00441908857100

    and ask to speak to the service department. They should be able to help with any queries


  • Registered Users, Registered Users 2 Posts: 168 ✭✭JJV


    dfkorg wrote: »
    Contact Korg UK at

    00441908857100

    and ask to speak to the service department. They should be able to help with any queries

    Thanks for that. Will do tomorrow.

    www.jjvernon.com


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 75 ✭✭ev612337


    Probably a fault with the keypress registering as a full hard hit. Likely to be a problem with the membrane under the key which sits on the PCB. With due care and a suitable screw driver, you should be able to strip the keyboard down to this level and examine the contacts on the membrane. Careful cleaning may solve your problem.


  • Registered Users, Registered Users 2 Posts: 7,790 ✭✭✭PaulBrewer


    ev612337 wrote: »
    Probably a fault with the keypress registering as a full hard hit. Likely to be a problem with the membrane under the key which sits on the PCB. With due care and a suitable screw driver, you should be able to strip the keyboard down to this level and examine the contacts on the membrane. Careful cleaning may solve your problem.

    Actually now you mention it ..... wasn't that a common problem on SP300s a few years ago ?


  • Registered Users, Registered Users 2 Posts: 75 ✭✭ev612337


    Hi again Paul,
    Yes you're right. In fact, it's a 'known issue' with several models. And, they're not all Korg either just for the record... I've seen it with various Yamaha and Clavia models too for example


  • Closed Accounts Posts: 2,655 ✭✭✭i57dwun4yb1pt8


    cant help,

    but nice composing work I must say .


  • Registered Users, Registered Users 2 Posts: 1,456 ✭✭✭ZV Yoda


    DaDumTish wrote: »
    but nice composing work I must say .

    I have to agree... and nice to see what can be done with sampled instruments. I really liked the piece you did for the BBC wildlife documentary. Good stuff...


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 168 ✭✭JJV


    Well I rang Korg Service Dept. They were most helpful & gave the same advice as ev612337 - strip it down & see if there was dirt on the pressure sensor under the faulty key, if so use isopropyl alchohol to clean it.

    The trouble was once the case was opened there was no easy way to remove the keys & expose the sensors underneath. There appears to be a rod travelling through all the keys attaching them together with no easy way of removing the rod or detaching individual keys from it. So with a show approaching that evening we decided to put the keyboard back together & I transposed all the pieces with an E in them to different keys!

    Thanks for the kind words about the compositions on my web site.

    Now, does anyone know about the faders on the Yamaha 01V? One of the faders will not travel all the way to the top & when the desk turns on it alerts us to the dodgy fader. Other than that the desk works great.

    College gear certainly takes a hammering.

    www.jjvernon.com


  • Registered Users, Registered Users 2 Posts: 75 ✭✭ev612337


    Hi JJV,
    There is quite a bit of stripping required to get to the point where you can remove, examine and clean the necessary bits alright.
    On the 01V, the problem is likely to be a worn fader.
    I can sort both units out for you if you wish. See my web site: www.fixtronix.ie
    All the best,
    Dave


Advertisement