Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

fitting mondeo mk3 clutch

  • 04-02-2009 9:49pm
    #1
    fordpopular
    Registered Users, Registered Users 2 Posts: 10 ✭


    Hi I have to do a clutch on a 2001 1.8 petrol mondeo I was just wondering if anybody has done one before .is it the same as a mark2 mondeo where you have to drop the front subframe to get gearbox out

    anybody with any tip's would be greatly appreciated


Comments

  • #2
    Healyc
    Closed Accounts Posts: 198 ✭✭Healyc


    Yes have done loads.

    Complete front subframe has to come down.

    Steering Rack Bolts 18mm hard to get at. There is a special tool but long extensions and a wobble joint will do.

    Make sure you mark the position of the subframe on the chassis with tipp-ex before you take it down as the holes are escentric. Of course there is special tools for this aswell.

    Have done one or two on the ground but if you can do it with the use of a ramp.


  • #3
    fordpopular
    Registered Users, Registered Users 2 Posts: 10 ✭fordpopular


    thanks Healyc i dont have luxuary of ramp so will have to do it on ground


Advertisement