g36c upgrading

plastic_axe

could anyone link a nice and simple guide for an fps upgrade?
steps and parts needed.
been googling for 20 mins and can't find anything useful.

edit: upgrading to .999 J ofc

Masada

what make is it?
did you get it from tony? if so theres an FPS reading writen on the box. if its a bit low (which its never usually, mostly about 300-320) then you can pick up an MS80 spring that will give you in or around the 320 range., be advised though that getting too close to the limit can mean that in certain weather conditions your gun might read as being over the limit.,

you could pick up one of these aswell, (this will up the FPR by about 10ish)
http://www.rsov.com/index.php?target=products&product_id=1461


A good quality piston too,
http://www.rsov.com/index.php?target=products&product_id=1474



and a new set of bushings, either solid or bearing bushings,
http://www.rsov.com/index.php?target=products&product_id=1509

plastic_axe

it's a tm. didn't get it from tony. seems to be clocking in lower than what it's supposed to be, 290 ish.
read somewhere that changing the spring while keeping stock everything else can be trouble, any truth in that?

Masada

It wont be a problem aslong as you dont go too high with it, the standard TM piston is really good anyway so ya wont need one of them.,
get the bushings and shims though and your have a healthy and good performing AEG.,

plastic_axe

many thanks good sir