Threaded barrel G23

kinkstr

Anyone know where i can find a threaded outer barrel for a KJW Glock 23?

Masada

i think the G19 one is the same, they have them on UnCompany but their site is down at the moment.,

kinkstr

vtec wrote: »

i think the G19 one is the same, they have them on UnCompany but their site is down at the moment.,

Yea ive seen that on there. Just need to know IF it will work with the 23.

kdouglas

i'd imagine it would since the G23 is (as far as i know) a G19 chambered for .40 instead of 9mm

Masada

kdouglas wrote: »

i'd imagine it would since the G23 is (as far as i know) a G19 chambered for .40 instead of 9mm

yup., tis the same piece otherwise so i cant see them changing too much internally for the airsoft version.,
on a seperate note, while googling G23 i came up with a peach of an inner barrel for my G18.,

kinkstr

kdouglas wrote: »

i'd imagine it would since the G23 is (as far as i know) a G19 chambered for .40 instead of 9mm

It is, but who knows if the boys at KJW took that into consideration when they made the airsofts.:eek:
Its for a mates glock and i dont think he wants to take a chance on it not fitting and he was hoping one of you lot would come along and say "hey ive got that on my 23":)

I went through ehobby last night looking for that threaded barrel for the g17 and couldnt find the fcuker, good man vtec.

Masada

chek this out, looks like i was right.,

http://www.uncompany.com/pageproductdetails.asp?prodid=8436
thats a slide and outer barrel and it says it for the G19 and the G23.,

then theres this?
http://store.matrixbb.com/servlet/-strse-26820/KSC-fdsh-KWA-M23F-Full-Metal/Detail

kinkstr

That looks pretty definitive, thanks again vtec.

kdouglas

vtec wrote: »

chek this out, looks like i was right.,

http://www.uncompany.com/pageproductdetails.asp?prodid=8436
thats a slide and outer barrel and it says it for the G19 and the G23.,

then theres this?
http://store.matrixbb.com/servlet/-strse-26820/KSC-fdsh-KWA-M23F-Full-Metal/Detail

Is that barrel threaded though?

kinkstr

Nope it isnt, but it proves that a g19 outer barrel will fit the g23, and i think hes sourced a threaded one that says its for a g19.

Masada

yep., i had a few forums up about the G&G barrel and the madbull barrel and they also said its the same thing., the G&G barrel seems to have a few bad reviews though.,.

kinkstr

will a glock 17 barrel fit cos i cant find at 19 or 23 threaded anywhere, i know it will be a small bit longer but has anyone tried this or even know the measurements for the 17, hes desperate at this stage.

Masada

it has been tried and will work, i found info on it earlier but i didnt keep any of it., as you said it will stick out a little though.,
i even found measurements of the 2 barrels from them, have a search in google and see what ya come up with.,

kinkstr

Will a mauri outer barrel fit in it by any chance?

kdouglas

Well it just so happens that I have both a G17 & G19 here beside me, below are the inner barrels side by side:




The g17 (longer) barrel is from a clone and the g19 is from a KSC, the part where the hopup chamber sits is slightly different on both

Have you got a link to the G17 inner barrel? might be interested in one myself

kinkstr

This one here -
http://cgi.ebay.com/Guarder-G17-STEEL-CW-Outer-Barrel-for-Marui-G-GK-23-BK_W0QQitemZ270202029384QQihZ017QQcategoryZ31687QQtcZphotoQQcmdZViewItemQQ_trksidZp1713.m153.l1262


i was thinking i could get the thresded 17 and put a 14mil tap down it, it would be perfectly aligned as you would be sliding it on over the already threaded portion of the metal, but would there be enough metal to catch the thread.
are the chambers any way do-able with a dremmel. i have to get this to work

kinkstr

vtec wrote: »

it has been tried and will work, i found info on it earlier but i didnt keep any of it., as you said it will stick out a little though.,
i even found measurements of the 2 barrels from them, have a search in google and see what ya come up with.,

im a bit of an rtard and i cant find anything on them at all, noting usefull like a guide or walk through.
have you a link by any for any of that, my brain is well and truley fried from this all day:(:mad::(

iceage

kdouglas wrote: »

i'd imagine it would since the G23 is (as far as i know) a G19 chambered for .40 instead of 9mm

Correctamundo!!!