NASN FTA on 28E at moment

snaps

11475V, SR 3151, FEC 3/4 comes up as SRC or something simular (I renamed the channel NASN, so cant remember what it scanned in as)

mjsmyth

Sshhhhhhhhh!!!

Don't be telling anyone that!! Someone might find out

I don't think you can get it thru a Sky Box though.

mj

snaps

no, it cannot be got on a sky box. I think its NASA Europe.

shortlegs

It's listed as GCUK4

Bridan

I can't seem to pick up the NASN channel on my FTA box (comag sl55), when I scan the transponder (11475V, SR 3151, FEC 3/4), I get nothing!, not even an encrypted channel.

Does anyone else have the same problem or have a solution to this?

watty

Since it is a low SR and it may even be on a Central Europe beam, it may not work on a small dish or a less than perfectly aligned dish. If it is a feed it may be lower than normal power too.

I've been busy so have not looked.

mjsmyth

I have had NASN for the last 2 or 3 weeks. Getting it clearly on a Strong 6355. I also tuned it in for a friend on his Comag SL55 without problems.

mj

Bridan

Thanks for the feedback,
I have an 80cm dish and no trouble with any other channel. But it may not be perfectly aligned, I'll give it another go this evening.

mjsmyth

Try

11474.00 V 3150 3/4

mj

watty

On low SR always try 1MHz then 2Mhz either side as tuning is more critical and your LNB may not be exactly 9.75 and 10.6