Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Advice needed on basic FTA system

  • 25-02-2006 10:10pm
    #1
    Closed Accounts Posts: 55 ✭✭


    Hi All,

    I am looking to purchase a FTA receiver and dish. It will be used during the summer months on a mobile home located on the Waterford coast. I am a complete newbie to the world of satellite TV and any recommendations or advice on a complete FTA system for a budget of 150euro's would be greatly appreciated.

    Looking through the sticky I came upon this
    Sab explorer fta + 60 cm dish+ lnb+ wall mount+f connectors
    Satellite system design for Astra 28,2 for 159euro's.

    Is this a good deal and what quailty of stations would I receive.


Comments

  • Registered Users, Registered Users 2 Posts: 32,417 ✭✭✭✭watty


    Any FTA system pointed at 28E gives
    http://bytelive.com/wiki/tiki-index.php?page=Free+To+Air+on+Sky

    The channel numbers will be wrong, I'll fix that in next day or two.

    Expect to pay €160 to €250 ex install. It can be DIY.

    If you go for an 80cm dish and a motor then you get about 20 satellites instead of one. This costs 100 Euro extra for the motor. Though it adds about 1500 TV and 1400 Radio free, you probabily delete most and keep only about 20 TV and 30 Radio extra :)


  • Closed Accounts Posts: 55 ✭✭Father_Ted


    Thanks for the information Watty. I'll be going down the DIY route, what tools
    are needed for an install of the Sab explorer system posted above and have you got any tips on getting a good signal. I am looking at a 60cm dish as anything bigger may be to big for a mobile home.


  • Closed Accounts Posts: 507 ✭✭✭satworld


    you never mentioned cable,or bolts and plugs,also would be handy to have a sat finder might be easier but not much.
    tools; a drill,spanner,screw driver,hammer


  • Registered Users, Registered Users 2 Posts: 71,184 ✭✭✭✭L1011


    Proper expansion bolts are a must, if you want the dish to stay on your wall in Irish winds.


  • Registered Users, Registered Users 2 Posts: 71,184 ✭✭✭✭L1011


    Err, scratch that, expansion bolts aren't going to work on a mobile home :p


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 32,417 ✭✭✭✭watty


    On my "batcave" at bottom of garden I used stud bolt from co-op and drilled right through wall. Then put washers and nut son both ends before cutting of excess.

    Some walls crumble with expansion bolts and Mobile Homes etc you need to go right through and fit a plate on inside.


  • Closed Accounts Posts: 55 ✭✭Father_Ted


    Cheers lads, thanks for all the info. I'll be starting on my little project in the comming weeks, I'll let you know how i get on.


  • Closed Accounts Posts: 507 ✭✭✭satworld


    watty wrote:

    Some walls crumble with expansion bolts

    true


  • Closed Accounts Posts: 24 yvry


    [edit]absolutely no advertising please


  • Registered Users, Registered Users 2 Posts: 32,417 ✭✭✭✭watty


    Upside down snapped cord whirly bird line works. I've used them with a single wire cord tying all four arms and 8 blocks on wire to support a radio transmitter mast.


  • Advertisement
  • Closed Accounts Posts: 183 ✭✭xbox-man


    ummm the guy that happens to own corksat, his name is also yvry, i wonder,
    maybe your'e advertising, the guy is already lookin to buy the gear of corksat,
    isn't that enough????


Advertisement