Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

[UK] NTL pilot wireless bb in Milton Keynes

  • 04-11-2003 8:31pm
    #1
    Moderators, Motoring & Transport Moderators, Technology & Internet Moderators Posts: 23,276 Mod ✭✭✭✭


    NTL is running a pilot project to deliver broadband over 10GHz wireless hardware in Milton Keynes in the UK.

    You can find more iformation about it here

    This begs the question, if NTL can deliver bb over wireless in the UK, why not here in Ireland?

    They even have free MMDS frequency to do this in someplaces in Ireland.


Comments

  • Closed Accounts Posts: 6,143 ✭✭✭spongebob


    Originally posted by bk
    They even have free MMDS frequency to do this in someplaces in Ireland.

    Thats debateable, Comreg decided to squat on a valuable slab of spectrum between 2.6 and 2.7Ghz after a spurious consultation during the summer where they paid no attention to anybody or to the needs of rural communities.

    NTL could also use DOCSIS compatible wireless in the 5.8Ghz band .

    M


  • Closed Accounts Posts: 2,784 ✭✭✭Urban Weigl


    Originally posted by Muck
    NTL could also use DOCSIS compatible wireless in the 5.8Ghz band .

    Using unlicensed spectrum is fine for small and medium sized ISP's, to an extent, but I do not think it would be suitable for a very large rollout due to the possibility of interference, power limits, limited spectrum, etc.


  • Registered Users, Registered Users 2 Posts: 2,127 ✭✭✭STaN


    5.8Ghz is not suitable for large rollouts due to its range. It could not cover the country side and would only be suitable in built up area's.

    In 5.8Ghz, any transmitter that is put up has to be registered with ComReg. Therefor you check and choose another part of the 150Mhz spectrum available. With 10Mhz channels this means there are 10 channels. With 6Mhz channels, there are roughly 25 channels available which is loads.


  • Registered Users, Registered Users 2 Posts: 1,660 ✭✭✭crawler


    Correct - 5.8Mhz is not good enough for a meaningful deployment...


  • Closed Accounts Posts: 2,784 ✭✭✭Urban Weigl


    The range is limited due to the power limit imposed by ComReg, not because it's 5.8ghz.

    In the US, you are allowed 200 watts at 5.8ghz. In Ireland, you are allowed just 2. Check www.redlinecommunications for kit that operates at 5.8ghz (a Canadian company).


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,660 ✭✭✭crawler


    :)

    200W at the BTS not the CPE - it would be fun to cook the punters though!


Advertisement