anyone know it?
Dunno the freq off hand though it's on www.lyngsat.com but the freq will be no good to you anyway. The channel will be encrypted with an ROI viewing card. You need a UK FreeToView card or such like!
Go to Community>>ICDG>>Satellite for further info!
works just fine ,thanks
That code still works if anyone is looking for it. Just used it this morning because the wife wants to see Jedward on BB
works for me as well daughter wanted it for same reason
Press the ‘Services’ button on your remote control. This is near the top, to the right.
Find and press ‘Add Channels/Add Chnls’.
Enter the following frequencies:
Symbol Rate (Mbaud): 22.0 (22.000)
After you have inputted the foreign data above, press the yellow button to ‘Find Channels’. (You may receive a messaging telling you that it is scanning, and to please wait.
You should now have found ‘Channel 5’. Press the yellow once it’s highlighted and press the ‘Select’ button.
After all that, you should see ‘Channel line-up complete’.
Anyone know if there is a frequency for channel 5 star ?
Below are the frequencies for all channel 5 channels and one of them is 5 Star
FIVE USA 12.422 H 27500 2/3
FIVE USA +1 12.422 H 27500 2/3
FIVER 12.422 H 27500 2/3
FIVER +1 12.422 H 27500 2/3
They r all the same codes ? thats just for the normal channel 5 !! ahhh i really want the Channel 5 USA r 5 *(star)
Thanks djburner the codes are right but "program unavailable"
Ye i got that message aswell .. some really good shows on the 5* tho .. pity :-(
Remove the Sky card and it should be no problem.
And following that, if you pull out the sky card, turn off the box, wait a few seconds and turn the box back on without the card, the UK EPG will appear (no RTE's though). Channel 5 will work fine now!