Hi all anyone have any experience with the 1056 case ih we are
having no luck with getting it to select 4wd changed filters oil
checked valves still its stuck in 2wd any help would be great!
Thanks in advance
Hi the valve was moving freeely when the filter was off the solnied
is working as we had it off and tried it out of the housing on the switch
handbrake and foot brakes are good oil pressure switch goes out as normal
no four wheel drive with the brakes applied im thinking the fault may be in the brake unit that the oil passes through before reaching the transfer
box but no one seems to know much about this if i just blank off the pipes
and stop the oil going to the transfer box will that give me four wheel drive??
I had the soleniod off the top of the filter it is working ok the valve inside the filter housing is moving freely with a push of a screwdriver! Do you think the soleniod on the back of the brake accumalator is linked to the 4wd so if its stuck oil will get through! Thing is there is two soleniods on the accumaltor one top and one to the rear of it! Someone suggested bypassing the accumalator altogether and piping straight from filter to the transfer box! Would this have an adverse effect on the brake system? Mine is 40k is there much difference in the 30k set up? Have you had any such trouble??
Hi thats brilliant thanks for all your help im going to bypass the acc and see if i get 4wd
if so i will put a manual valve up into the cab and eliminate the electrics altogether
i will post here how i get on? where did you get the manual??
http://www.ebay.ie/itm/CASE-IH-844-56-956-1056-SERVICE-TRAINING-MANUAL-/300740180098?pt=UK_BOI_FarmingEquipment_RL&hash=item460582f882 http://www.ebay.ie/itm/Case-956-1056-Workshop-Parts-Operators-Manuals-/120951696226?pt=UK_BOI_FarmingEquipment_RL&hash=item1c29486b62 these are the two i have,theres a lot of useful info in both.
Hey there I finished the bypass last night checked it and was working great!
Removed the brake acc and put a gate valve in between the orignal pipes!
Operate this with a cable up inside the cab so now we just need some weather
to get some harvest started to test it properly! Thanks for all the help!!