Got tired of our T90s breaking because of limescale so we installed a water filter but I've found they only last about 2 years anyway one we have now next time I'm trying another brand not sure if it will make a difference they just don't seem to last very long.
Hi there. Does anyone know where I could get the switch box of a power shower....you know the white box with the red light and string that you have to pull to turn the shower on? Ours has gone. We opened it up and it looks like the spring part is broken. Checked in Woodies and they don't stock them...does anywhere or is this a job for a plumber? Thanks.
Pull cord switch and back box. In an electrical wholesale or retailer...
eg T O Reilly
I am amazed woodies dont do them. I would not get them in b&q. I would imagine they do the cheap ****ty ones. Tell the folks in the electrical shop you dont want it getting stuck in a year.
Thanks Joey, picked one up in an Electrical Wholesale place in Swords today, thanks. Woodies seem to do every little part of a shower except what I needed
I have a triton t90 and from your posts above I reckon it must be fed from the tank. Does the temperature of the water in the tank have any bearing on the heat of the water coming from the shower.
I was on here last year looking for advice as I thought the element was gone in the shower. The water was only mildly Luke warm coming out. Didn't do anything about it though cause I was smashed at the time and the problem seemed to have sorted itself out, strangely enough as the weather got milder. Worked like a dream all summer but vie noticed a dramatic drop in the temperature of the water coming out of the shower these last 2 weeks.
Is it just coincidence or is the shower just playing up?
Sounds like your heating element is going. If the pump was going you would also notice that noise change as well..
Hi, I've just joined the board to ask a question thanks. Can anyone help with a very high pitched triton t90xr shower, only happened 2 weeks ago. Temperature control and water pressure are normal. From other threads I see folk are saying it happens and it coincides with another problem in the shower unit but everything else works fine, in fact the solenoid is brand new.
Ta for your help
Folks I have a triton aspirante electric shower. When it's on the the high setting it's too hot. When its on the medium setting I have it a number 8 to get it to temp. Ive bought a new shower head thinking it would cure the problem but no such luck. Oh I'm one of those peoe who cleans the shower head every 10 days or so. The water in my area wouldn't be great so I'm thinking heater element?
Its 5 yrs old this month. Would I be better off replacing the shower?
It sounds like the motor, Its brushes might be going.
Is the head you bought a triton head? When you say aspirante is it a T80 aspirante or a T90 aspirante...
It's a triton shower head alright. The shower has no model number although it's silver if that helps and also sounds v noisey/whiney. My folks have same shower, same age but sounds alot quieter
Is it a T80 or a T90.
t80 Mains fed.
t90 Tank fed.
This is important. You need to check
You should try get the same type that you had before to make it easy to install it.
Its a T90. It seems the heater element is gone. So I'll think I'll just get a new shower. Comes with 2 year warranty compared with 6 months on a repair.
Please read the charter before posting.... Please read the general charter as its your first post...
I have a Mira Elite ST. I worked fine ontil last night, when during a shower the pump motor started to speed up and the shower stops working. The low pressure light now comes on when I test it. I checked the filter and its clean and water supply seems ok. Anyone got any ideas?