Boards.ie

mickydcork · 24-07-2012, 14:39

Hi

I've just installed some mdf t&g effect panelling (wainscoting) in my bathroom.

I'm looking to put a nice finish to the top edge.

It is usually done with what it called a cap molding.

Has anyone any ideas where I might source this, or some alternatives that would do and look nice?

thanks

Mickyd

woodturner · 26-07-2012, 22:34

Depending on the thickness of the panel you could get a few lengths of 2" or 2 1/2" x 1" and put a bullnose on the front edge. 1" would be very thick for this so you may need to thickness it down to 3/4". Another moulding can be placed underneath this onto your panel to thicken it up and make it look like one large moulding.

24-07-2012, 14:39	#1
mickydcork Registered User Join Date: Sep 2009 Posts: 89 Adverts \| Friends	Cap molding for mdf panelling Hi I've just installed some mdf t&g effect panelling (wainscoting) in my bathroom. I'm looking to put a nice finish to the top edge. It is usually done with what it called a cap molding. Has anyone any ideas where I might source this, or some alternatives that would do and look nice? thanks Mickyd

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

26-07-2012, 22:34	#2
woodturner Registered User Join Date: Apr 2011 Location: Tullamore Posts: 395 Adverts \| Friends	Depending on the thickness of the panel you could get a few lengths of 2" or 2 1/2" x 1" and put a bullnose on the front edge. 1" would be very thick for this so you may need to thickness it down to 3/4". Another moulding can be placed underneath this onto your panel to thicken it up and make it look like one large moulding.