Boards.ie uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Click here to find out more x
Post Reply  
 
Thread Tools Search this Thread
25-05-2011, 00:46   #1
cruhoortwunk
Registered User
 
Join Date: Mar 2010
Posts: 352
Would a North American TV work in Ireland?

I'm moving home from Canada in a few weeks. I'm shipping some electronics back too.
Just wondering would most electronics work back home if I get a travel adapter to convert to the Irish plug?
Eg. My Sony lcd tv, would it usually work for both PAL and NTSC? Any other considerations?
cruhoortwunk is offline  
Advertisement
25-05-2011, 01:09   #2
cruhoortwunk
Registered User
 
Join Date: Mar 2010
Posts: 352
I just found an answer to the tv question here:
http://www.boards.ie/vbulletin/showt...php?p=69248765

What about the micro sound system that should work no? Also I have a Wii. I know that it plays ntsc games, which is fine, but would it mean it wouldn't work with a tv bought at home?
cruhoortwunk is offline  
26-05-2011, 22:38   #3
jpmiddleton
Registered User
 
Join Date: May 2011
Location: Dublin
Posts: 77
Send a message via Skype™ to jpmiddleton
Your sound system should work no problem, not so sure about the Wii.
jpmiddleton is offline  
01-06-2011, 09:52   #4
mossym
Registered User
 
Join Date: Mar 2006
Location: Killaloe
Posts: 2,391
very unlikely your mini system will work back here with just an adapter, the mains supply is totally different, you will likely need a transormer to step our 220 down to 110 for your system, unless it says 220v on the back
mossym is offline  
01-06-2011, 13:35   #5
ZENER
Registered User
 
ZENER's Avatar
 
Join Date: Apr 2003
Location: In a dreamworld according to me da !
Posts: 4,644
Send a message via Skype™ to ZENER
Quote:
Originally Posted by jpmiddleton View Post
Your sound system should work no problem, not so sure about the Wii.
Without knowing the make/model this is a very dangerous statement to make !! Most audio equipment use standard step down trafos as opposed to switch-mode supplies. The latter can take a range of voltages and are used in most modern TVs and computers. Standard step down trafos are made/wired for a specific input voltage and, as they are an inductive device, frequency. Some may have a 110/220 switch on the rear near the supply cable entry point but most won't.

OP check the rating plate or user manual for the supply requirements for your audio equipment or any electrical devices you bring from the US before plugging it in here on our 230VAC 50Hz system.

Ken
ZENER is offline  
Post Reply

Quick Reply
Message:
Remove Text Formatting
Bold
Italic
Underline

Insert Image
Wrap [QUOTE] tags around selected text
 
Decrease Size
Increase Size
Please sign up or log in to join the discussion

Thread Tools Search this Thread
Search this Thread:

Advanced Search