[hibble]

Originally Posted by malpad

Installed the new ones today, I cannot get certain channels i.e. Kids Tiny POps and KIxs music channels also.
Got on to support and they say I might have an issue with My dish or LNB. .

I had this before and it was interference from the phone (landline) base station. Try moving the box or base station - might have to only move it a foot or so.

[malpad]

Hi hibble,

The phone line is maybe 20 ft away as it is, didnt have this prob with the older one. Puzzling!!
Thanks

[jamescc]

helpline number for triax: +(00)44 1443778910

[Macy0161]

Originally Posted by malpad

Installed the new ones today, I cannot get certain channels i.e. Kids Tiny POps and KIxs music channels also.
Got on to support and they say I might have an issue with My dish or LNB. Could this be true is anyone else experiencing simailar issue.

Don't have that receiver, but Tiny Pops is one of the first to go if I've dish/ lnb/ cable issues. I'm in an exposed location, so that one going is normally the first sign something is amiss. First thing I'd do is swap the reciever for one that's working, if at all possible, from family or friend if you don't have a 3rd one.

[Orson100]

Originally Posted by Orson100

When you delete all the rubbish there's not a huge amount of worth-keeping FTA channels left so absence of facility to re-order/-number channels not a huge deal for me really, and there's always the favourites lists available for sub-categorisation if desired.

Sorry for my earlier misinformation: there is a perfectly sound facility on the HD537 for reordering/numbering the channel list according to one's preference.

Orson.

[jamescc]

Originally Posted by jamescc

helpline number for triax: +(00)44 1443778910

i tried that helpline that i posted up. i rang three times. phone rang and rang got an answer machine each time.

[malpad]

Hi figured out my issue with missing channels POP Movies Music etc. done a manual satelite tune, under menu, setting changed the frequecncy to 12552v " V meaning LNB Vertical."
as per the website link below
http://www.lyngsat.com
Hope this is some use.
Thanks

[dcom]

Hi,

I was wondering if anybody knows where the ir sensor is located on the front of the triax st hd 537 box??

Thanks

Dcom

[Orson100]

Dcom, don't know offhand, but if you physically screen the entire front panel with a book or something and then gradually move it laterally, while continuously re-pressing a remote button as the front panel is revealed, then you could isolate the IR location pretty quickly based on point at which STB responds I would expect?

[liamo50]

HiThere,
Anyone out there got a channel dump file for the Triax ST-HD537 Combi .

Thanking all on advance

Liam

[rlogue]

Chaps is this box still a turkey or is it worth considering now?

[jamescc]

i have the box and i have no problems with . the epg could be a little better. but good

[KELTICKNIGHTT]

have one spare room and working ok,few fixes needed like guide etc

[Orson100]

Originally Posted by liamo50

HiThere,
Anyone out there got a channel dump file for the Triax ST-HD537 Combi .

Thanking all on advance

Liam

Hi Liam, you've prob sorted this by now but attached find my channel backup file.

For those unfamiliar with process:

1. Unzip contents to root of USB key (mine was standard FAT32-formatted).
2. Insert key in USB socket at rear of HD537.
3. Cycle on HD537 | Menu | Information
4. Key in not-so-secret code 1475
5. Restore from USB option. (Backup option here also).

I presume the restore works, I have not tested, just ripped the attached backup for a friend just now.

For those enquiring re general performance of the box, I have come across no further issues other than those expressed earlier re EPG limitations/bugs.

Orson

[jamescc]

has anyone problems tuning in BBC four