Riello RDB Oil Burner not firing Help - boards.ie
Boards.ie uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Click here to find out more x
Post Reply  
 
 
Thread Tools Search this Thread
27-12-2009, 13:32   #1
Westwood
Registered User
 
Join Date: Apr 2008
Posts: 443
Riello RDB Oil Burner not firing Help

Hello. this morning I realised my oil burner is not firing, it was working perfectly last night now this morning not a dicky bird from her. I tryed the reset switch a few times and nothing which is unusual. oil tank is full and the fuel filter (glass bowel) seems ok. also bleed her a few times. also cleaned the photocell thingy which was dirty. anyhting else I can try? prob not gonna get anybody out here till tuesday and its bloody freezing so any help is appreciated . thanks
Westwood is offline  
Advertisement
27-12-2009, 13:34   #2
Avns1s
Registered User
 
Avns1s's Avatar
 
Join Date: Jun 2006
Location: Mayo (80m / 262ft ASL)
Posts: 2,963
Read this thread and see if it helps. http://www.boards.ie/vbulletin/showt...p?t=2055779011
Avns1s is online now  
Thanks from:
27-12-2009, 13:35   #3
henryporter
Registered User
 
henryporter's Avatar
 
Join Date: Oct 2007
Location: Carrickmacross Hey
Posts: 1,358
Might need to keep bleeding it to get a good supply of oil in.
henryporter is offline  
27-12-2009, 13:50   #4
items
Registered User
 
Join Date: Oct 2009
Posts: 669
Quote:
Originally Posted by Westwood View Post
Hello. this morning I realised my oil burner is not firing, it was working perfectly last night now this morning not a dicky bird from her. I tryed the reset switch a few times and nothing which is unusual. oil tank is full and the fuel filter (glass bowel) seems ok. also bleed her a few times. also cleaned the photocell thingy which was dirty. anyhting else I can try? prob not gonna get anybody out here till tuesday and its bloody freezing so any help is appreciated . thanks
Is boiler making any attempt to fire?

Weather is a bit diff than norm, boiler nozzles, air and oil pressure settings are all set to work off a temperature, different than Ireland is experiencing at the moment. Over last few days I've seen heaps of boiler problems here, also in the real world.

Maybe its just a case of your boiler not being set up to deal with such a low outside temperature.
items is offline  
Thanks from:
27-12-2009, 13:56   #5
Scudges Da
Registered User
 
Join Date: Dec 2009
Posts: 48
If the bioler is making no attempt to fire it is probably locked out by the high limit stat.

There shoulld be a grey or orange box on top of the boiler with a temp. dial and a black knob.

Unscrew the black knob and press the white reset button inside.

That should sort you out.
Scudges Da is offline  
Thanks from:
Advertisement
27-12-2009, 13:58   #6
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,411
Quote:
Originally Posted by Westwood View Post
Hello. this morning I realised my oil burner is not firing, it was working perfectly last night now this morning not a dicky bird from her. I tryed the reset switch a few times and nothing which is unusual. oil tank is full and the fuel filter (glass bowel) seems ok. also bleed her a few times. also cleaned the photocell thingy which was dirty. anyhting else I can try? prob not gonna get anybody out here till tuesday and its bloody freezing so any help is appreciated . thanks
If there is no sound when you press the reset button on the burner, try the reset button on the thermostat as Avns1s suggests. If this works, turn down the thermostat a bit and all should be OK.
JamesM is offline  
Thanks from:
27-12-2009, 14:21   #7
Westwood
Registered User
 
Join Date: Apr 2008
Posts: 443
ah thanks a lot lads yes it worked. didn’t know where that termo was was thinking it was the one inside the house. Yes I had it turned up to 5 the past few weeks as weve been practically snowed in up here and really needed it. only today the weather has cleared up and now that happened. Suppose it was high limit stat due to long periods of use, just clicked the orange pin and it fired up right away. again thanks to all who replied. Have a lovely holiday much obliged
Westwood is offline  
27-12-2009, 14:30   #8
Michaeltvc
Registered User
 
Join Date: Dec 2009
Posts: 2
Hello everyone. I've got the same problem as Westwood but burner only fires when I press the safety reset and stops when I let go! Any ideas please. Thanks
Michaeltvc is offline  
27-12-2009, 17:12   #9
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,411
Quote:
Originally Posted by Michaeltvc View Post
Hello everyone. I've got the same problem as Westwood but burner only fires when I press the safety reset and stops when I let go! Any ideas please. Thanks
Deleted - answer PMd

Jim.

Last edited by JamesM; 27-12-2009 at 18:51.
JamesM is offline  
Advertisement
27-12-2009, 17:54   #10
gary71
"A Gasman"
 
gary71's Avatar
 
Join Date: May 2008
Posts: 2,957
Quote:
Originally Posted by JamesM View Post
Anyone who objects to my advice, remember that this is a DIY forum
Jim.
I find that kind of advise very disturbing, i have seen enough qualified engineers getting it wrong let alone diyers, please don't start giving that kind of "helpful advise on gas" if that boiler is tank fed and due to the cold snap the tanks frozen and the system water drops off and the boiler stat gets accidentally left on max, what would happen then? then that couldn't happen because you covered everything in your post, how many times have you advised people over the phone and found when you got to site they got the wrong end of the stick, i have found in most incidents i have called to all be it gas, it has been something stupid that has led to the damage and bridging out a safety devise is something stupid, no insurance company would pay out for any damage, what service engineer would do that as a temp repair and put there name to it on a callout, i wouldn't have it in my house, i like to sleep at night.
gary71 is offline  
(2) thanks from:
27-12-2009, 18:19   #11
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,411
Quote:
Originally Posted by gary71 View Post
I find that kind of advise very disturbing, i have seen enough qualified engineers getting it wrong let alone diyers, please don't start giving that kind of "helpful advise on gas" if that boiler is tank fed and due to the cold snap the tanks frozen and the system water drops off and the boiler stat gets accidentally left on max, what would happen then? then that couldn't happen because you covered everything in your post, how many times have you advised people over the phone and found when you got to site they got the wrong end of the stick, i have found in most incidents i have called to all be it gas, it has been something stupid that has led to the damage and bridging out a safety devise is something stupid, no insurance company would pay out for any damage, what service engineer would do that as a temp repair and put there name to it on a callout, i wouldn't have it in my house, i like to sleep at night.
Gary, I don't know why you are mentioning gas - the guy is talking about oil. I gave enough warnings. I told him not to leave it on unsupervised. Do you want him to have frozen and burst pipes all over the house ? He may not get a stat for a week. It is not a normal time of the year when you can call someone out the next day.
Maybe we should stop giving any DIY advice about heating on this DIY forum.
Jim.
JamesM is offline  
27-12-2009, 18:20   #12
items
Registered User
 
Join Date: Oct 2009
Posts: 669
Jim no offense but thats not great advice, no way on earth should you interfere with the pin on a high limit stat. If that pin keeps popping out, the boiler should not be allowed run, end of.

Think about safety and insurance implications after forcing a boiler to run by manipulating its safety feature.

Heating pipes will not burst, if your worried about heating pipes bursting the safest advice is to turn off the heating water supply.

Last edited by delly; 29-12-2009 at 00:49.
items is offline  
Thanks from:
27-12-2009, 18:24   #13
Michaeltvc
Registered User
 
Join Date: Dec 2009
Posts: 2
Thank you JamesM, I held the safety stat switch down for a few minutes and released. The rads were starting to heat up, so I repeatedthis 3 more times and then the boiler stayed on automatically. I think that there may have been some ice in the pipes blocking the return feed. working fine now. Thank you for your advise and for outlining the safety issues involved.
Michaeltvc is offline  
27-12-2009, 18:49   #14
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,411
Quote:
Originally Posted by Michaeltvc View Post
Thank you JamesM, I held the safety stat switch down for a few minutes and released. The rads were starting to heat up, so I repeatedthis 3 more times and then the boiler stayed on automatically. I think that there may have been some ice in the pipes blocking the return feed. working fine now. Thank you for your advise and for outlining the safety issues involved.
Hi Michael, I'm glad you got it going. That stat could give trouble again, so you should replace it as soon as possible, or it may let you down completely.

As you can see I got into trouble with some of the others for giving that advice to someone who might not be competent.

Gary and items, I will delete the advice and PM it to Michael just in case he feels that he has to use it to avoid burst pipes over the next while, until he replaces the stat.
Jim.
JamesM is offline  
27-12-2009, 19:12   #15
gary71
"A Gasman"
 
gary71's Avatar
 
Join Date: May 2008
Posts: 2,957
Quote:
Originally Posted by JamesM View Post
Maybe we should stop giving any DIY advice about heating on this DIY forum.
Jim.
Jim, with all due respect where do we draw the line, in describing how to bridge out a overheat you leave it for the fruitloops of the world to try something that may not be suitable for their situation but they will give it a lash anyway, how do you put that advise in to contexts, if a fruitloop(and i don't mean Michael) followed your advise and it led to damage how would you feel, by bridging out any safety device you take something thats inherently safe and in the turn of a screwdriver make it a potential hazard, now the chances of something going wrong are minimal but things do go wrong, why take the risk, i don't know what you're experiences are of things going wrong but i have seen enough myself to get nervous about your post, I'm not a boiler policeman so I'm not going to tell you what to do, i just think there are risks with that sort of information/advice, Gary.
gary71 is offline  
Thanks from:
Post Reply

Quick Reply
Message:
Remove Text Formatting
Bold
Italic
Underline

Insert Image
Wrap [QUOTE] tags around selected text
 
Decrease Size
Increase Size
Please sign up or log in to join the discussion

Thread Tools Search this Thread
Search this Thread:

Advanced Search



Share Tweet