CAP 2 SFMA ASSESSMENT 2010

Coldplayer · 30-12-2009 9:35pm

Hey guys what figures are you using for redeemable debentures cost in the adjusted wacc Option 1

wannabe_auditor · 30-12-2009 10:29pm

Why are people not including the cost of the skilled labour? Just because it is available doesn't make it free. I mean the replacement materials are available but will we still incur a cost to replace them. So surely we must apply the same logic again and incur a cost for labor used.

What are people doing with the contribution, seen as though it is from another contract are we to ensure that contribution gained from this contract is greater and therefore justify the removal of the unskilled labour from the previous contract?

hawai09 · 30-12-2009 10:47pm

hi guys cant believe the amount of hits on this site already!
just wondering if anyone got an expected loss of €11,000 a group of us just brain storming here not too sure if we are on the right track all comments appreciated!

Coldplayer · 30-12-2009 10:54pm

wannabe_auditor wrote: »

Why are people not including the cost of the skilled labour? Just because it is available doesn't make it free. I mean the replacement materials are available but will we still incur a cost to replace them. So surely we must apply the same logic again and incur a cost for labor used.

What are people doing with the contribution, seen as though it is from another contract are we to ensure that contribution gained from this contract is greater and therefore justify the removal of the unskilled labour from the previous contract?

the reason you wouldnt include the cost of the skilled labour is that its a cost that would be incurred irregardless of whether the job is took on. its really only incremental costs that should be considered.

Coldplayer · 30-12-2009 10:58pm

hawai09 wrote: »

hi guys cant believe the amount of hits on this site already!
just wondering if anyone got an expected loss of €11,000 a group of us just brain storming here not too sure if we are on the right track all comments appreciated!

i got a gain of 8000 but i seem to be the only sod with a gain.

Material CX (4000 Kg)- 10,000.00 Materials FG (5000 Kg) 5,000.00 Materials NF (10000 Kg) 170,000.00 Skilled Labour (200 Hours) - Unskilled Labour ( 400 Hours) 76,000.00 Variable Overheads 8,000.00 Fixed Overheads 18,000.00 Contract estimation - Engineers Fees 25,000.00 Headquarter Costs 20,000.00 -

hawai09 · 30-12-2009 11:07pm

Coldplayer wrote: »

i got a gain of 8000 but i seem to be the only sod with a gain.

Material CX (4000 Kg)- 10,000.00 Materials FG (5000 Kg) 5,000.00 Materials NF (10000 Kg) 170,000.00 Skilled Labour (200 Hours) - Unskilled Labour ( 400 Hours) 76,000.00 Variable Overheads 8,000.00 Fixed Overheads 18,000.00 Contract estimation - Engineers Fees 25,000.00 Headquarter Costs 20,000.00 -

this is what we had
Material CX (10,000)
Material FG 20,000 - we were unsure about this
Material NF 170,000
Skilled labour 0
Variable o/h 12,000 (€20 x 600 hours in total)
Fixed o/h 18,000
Contract 0
engineering fee 25,000
headquarter 0 ( assuming already incurred not very clear)

Coldplayer · 30-12-2009 11:54pm

yeah i clearly didnt see that with regards to the variable overheads. everyone else seems to have left it at 8000 though, maybe someone could give their reasoning

I used the scrap value for the material FG as it seems to be the only remaining alternative.

wannabe_auditor · 31-12-2009 1:34am

Coldplayer wrote: »

the reason you wouldnt include the cost of the skilled labour is that its a cost that would be incurred irregardless of whether the job is took on. its really only incremental costs that should be considered.

not really cos if the project doesn't go ahead you won't use that labour at all and therefore pay nothing. perhaos i'll jus include a note with my assumption. i.e that the labour is simply available and that no cost has been incurred to date

Masjanja · 31-12-2009 11:38am

hawai09 wrote: »

this is what we had
Material CX (10,000)
Material FG 20,000 - we were unsure about this
Material NF 170,000
Skilled labour 0
Variable o/h 12,000 (€20 x 600 hours in total)
Fixed o/h 18,000
Contract 0
engineering fee 25,000
headquarter 0 ( assuming already incurred not very clear)

For Material CX there is only 2 reasonable options: 25000 and 5000. I initially put 25,000 (5,000kg *£5), as it is better alternative to use the material as oppose to scraping it. Then someone suggested that the wording 'could have been used as a replacement material' implies that this option is no longer available. Now I am confused, which one of them 25,000 or 5,000, but definately not the 20,000!

flashtash · 31-12-2009 11:46am

susie-q wrote: »

Looking back on my college notes I have relevant cost of materials will be the greater of alternative use value or the net realisable value. So for the case of FG would this not be the greater of scrap value €1 and replacement value €5.?
i.e. 5000 kg x €5 = €25000??

that's exactly what i was thinking!

erinsgirl · 02-01-2010 2:16pm

Hi.

Can anyone tell me the method they used to actually calculate the costs of equity and debt?

The methods I learnt in college are completely useless in this case.

seven-iron · 02-01-2010 3:14pm

Hi.

Can anyone tell me the method they used to actually calculate the costs of equity and debt?

The methods I learnt in college are completely useless in this case.

i thinks its the same.
wacc is wacc motha fúcka

hawai09 · 02-01-2010 3:31pm

has anybody looked into either if the above yet?

barrystealover · 02-01-2010 5:41pm

Can u elaborate the kd part in relation to how you got the market value excl interest(80).Could you also elaborate on the Kp how u got the Dividend(.30) and the market value ex Divident(6.00).am a bit rusty.tahanks

MAX72 · 02-01-2010 9:18pm

s.m.c wrote: »

My answer for the WACC is as follows:
Ordinary Shares 18.65%
Pref Shares 5%
Irredeemable Debentures 8%
Redeemable Debentures 12.11%

WACC 15.51%

There seems to be differences in the figures for redeemable debentures
My workings were as follows:

Year cashflow discount(5%) PV Discount(10%) PV
0 96.66 1 96.66 1 96.66
1-2 (13(1-.20)) 1.859 (19.33) 1.735 (18.04)
2 100 .907 (90.7) .826 (82.6)

PV of (13.37) and (3.98)

Kd = 5 + 13.37(5)/9.39

Kd = 5 + 7.119

Kd = 12.11%

My workings for WACC are:

2100(18.7%)/2100+240+400+290 + 240(5%)/3030 + 400(8%)/3030 + 290(12.11%)/3030

=15.51%

Anyone Agree/Disagree with this?

Hi there, I re done my reedemable calculations and got 12.11%

I now have 18.67%, 5%, 8% and 12.11% with an overall WACC of 15.56%.

I used a dividend growth of 12% while most people seemed to have used 11.99%. I would say anything is the range of 15.51 to 15.56 is about right, the differences are down to rounding.

MAX72 · 02-01-2010 9:57pm

hawai09 wrote: »

has anybody looked into either if the above yet?

Had a look the sources of finance. Its a choice between debentures and the rights issue as the 70 million shares at market value does not raise the necessary funds. Its down to the gearing ratios etc and company policy. I suppose then its a matter of debt v equity advantages and disadvantages..... what does other people think?

Onearmedbandit · 02-01-2010 10:16pm

Jaysus lads thats a lot harder looking then last year. Lots of things that they could ask you on.

Best of luck

barrystealover · 03-01-2010 1:02pm

eoin99 wrote: »

I've calculated an updated WACC for each scenario:
1. 14.21%
2. 15.82%
3. 15.86%

Anyone else calculated these & got similar answers? ( I was working off 15.55% as my original WACC)

On the theory side I suppose you could be asked the pro's/con's of each, issuing shares/increasing debt. Any other suggestions?

For scenario 1(redeemable debentures in 2031) i used
Disc 5% NPV disc 10% NPV
yr0 100 1 100 1 100
yr1-22 (6.4) 13.1630 (84.2432) 8.7715 (56.1376)
yr 22 (100) .3418 ( 34.18) .1228 (12.28)

totals (18.4232) 31.5824

using this i got an irr of 6%
and re doing WACC

ke 18.66% €2100m 11.73%

kp 5% €240m .36%

kd irr 8% €400 .96%

kd red 6% €600m 1.08%

14.13%

could some1 please tell me if this is right(might be off slightly) due to rounding.
have i used the proper figures in yr 0 and yr 22??
have i used the proper market value of €600m when recalculating the wacc(in the table above)

barrystealover · 03-01-2010 1:55pm

this is the calculations that i have done for the W.A.C.C. option 2(issue 70million ordinary shares at market value)?
any1 any comments?

John_P_C · 03-01-2010 2:36pm

What is everyone preparing for the section on Acquiring Rian Incorp in China?

My take would be something on;
Due Diligence
interest only loan
Translational risk

Just not sure how to approach this section. Any help would be appreciated

flashtash · 03-01-2010 3:31pm

MAX72 wrote: »

Had a look the sources of finance. Its a choice between debentures and the rights issue as the 70 million shares at market value does not raise the necessary funds. Its down to the gearing ratios etc and company policy. I suppose then its a matter of debt v equity advantages and disadvantages..... what does other people think?

yeah, exactly. i'm working out that the others are raising far more than the 300mill required though. you the same or am i miles off?

BlackHouse · 03-01-2010 3:32pm

s.m.c wrote: »

My answer for the WACC is as follows:
Ordinary Shares 18.65%
Pref Shares 5%
Irredeemable Debentures 8%
Redeemable Debentures 12.11%

WACC 15.51%

There seems to be differences in the figures for redeemable debentures
My workings were as follows:

Year cashflow discount(5%) PV Discount(10%) PV
0 96.66 1 96.66 1 96.66
1-2 (13(1-.20)) 1.859 (19.33) 1.735 (18.04)
2 100 .907 (90.7) .826 (82.6)

PV of (13.37) and (3.98)

Kd = 5 + 13.37(5)/9.39

Kd = 5 + 7.119

Kd = 12.11%

My workings for WACC are:

2100(18.7%)/2100+240+400+290 + 240(5%)/3030 + 400(8%)/3030 + 290(12.11%)/3030

=15.51%

Anyone Agree/Disagree with this?

I agree with this, anyone else get the same?

John_P_C · 03-01-2010 4:00pm

BlackHouse wrote: »

I agree with this, anyone else get the same?

i got 12.45% cost of capital for my Redemmable debentures and my WACC was 15.58% so pretty much the same as yours

BlackHouse · 03-01-2010 7:01pm

below is mine :

DetailsOrg costAdjustmentDescriptionRevised€€Material CX4000 kg @ €24,000 = €6 per kg 24,000.00 - 34,000.00 Cost of €10k to dispose- 10,000.00

Materials FG5000 kg @ €70,000 = €12 per kg 70,000.00 - 45,000.00 Replacement Value + Scrap 25,000.00 Materials NF10000 kg @ €80,000 80,000.00 90,000.00 Replacement Value 170,000.00 Skilled Labour200 hours 12,000.00 - 12,000.00 Idle if not used - Unskilled Labour400 hours 16,000.00 60,000.00 Opp cost forgone 76,000.00 Variable O/Head 8,000.00 4,000.00 Fixed + Var @ 20 per hour 12,000.00 Fixed O/Heads 15,000.00 3,000.00 Ignore allocation, include Insurance 18,000.00

Contract Estimation 44,000.00 - 44,000.00 Sunk cost - Engineers Fees 40,000.00 - 15,000.00 Do not include 15k retainer 25,000.00 HQ Costs 20,000.00 - 20,000.00 Reallocation ignore - Totals 329,000.00 - 13,000.00 316,000.00 Income 300,000.00 300,000.00 - 29,000.00 - 13,000.00 - 16,000.00

ava 10 · 03-01-2010 7:25pm

barrystealover wrote: »

For scenario 1(redeemable debentures in 2031) i used
Disc 5% NPV disc 10% NPV
yr0 100 1 100 1 100
yr1-22 (6.4) 13.1630 (84.2432) 8.7715 (56.1376)
yr 22 (100) .3418 ( 34.18) .1228 (12.28)

totals (18.4232) 31.5824

using this i got an irr of 6%
and re doing WACC

ke 18.66% €2100m 11.73%

kp 5% €240m .36%

kd irr 8% €400 .96%

kd red 6% €600m 1.08%

14.13%

could some1 please tell me if this is right(might be off slightly) due to rounding.
have i used the proper figures in yr 0 and yr 22??
have i used the proper market value of €600m when recalculating the wacc(in the table above)

got pretty much the same answer for wacc on debentures..just a bit confused tho with the year zero if its 2009 or 2010 and the market value of debentures nt sure if its 100 r has interest 2be subtracted etc..

MAX72 · 04-01-2010 10:22am

flashtash wrote: »

yeah, exactly. i'm working out that the others are raising far more than the 300mill required though. you the same or am i miles off?

The debentures raise the exact amount. They raise 600million but would have to pay off the outstanding 300 million. The rights issue raises 336 million.

TMB · 04-01-2010 11:22am

For calculating the cost of the machine, what are the majority of people doing re:

Material FG: Scrap 5000 V's Rep 25000
Skilled Labour: Sunk Cost or 12000
HQ Costs: Are only incurred if proposal is undertaken so should they not be included at 20000

Appreciate any help thanks

accounts10 · 04-01-2010 1:31pm

i have just been working on the relevant costing section.. just wondering did anyone get a loss of 16,000?

MAX72 · 04-01-2010 2:18pm

accounts10 wrote: »

i have just been working on the relevant costing section.. just wondering did anyone get a loss of 16,000?

Just put up your list of figures and people can see what you have and have not included.

lala1987 · 04-01-2010 2:48pm

SOS just logged on and being seen yer all doing calculations etc. :eek:any pin pointers where to start....tbh any help at all id really appreciate it:o

CAP 2 SFMA ASSESSMENT 2010

Comments