Sling stud problem

garv123 · 22-02-2015 12:46pm #1

The swivel stud that is on my 452 is very narrow compared to other studs, (half the width) I tried putting both of my bipods on it now and neither will grip properly because of the swivel been too thin and they just fall off.

i want to get a new set of the more common fatter studs for the front and back are they all different thickness/length threads on them or are they fairly generic?

Anyone have a set going spare?

skipking · 22-02-2015 3:04pm

qd swivels in most gun dealers.

garv123 · 22-02-2015 5:27pm

skipking wrote: »

qd swivels in most gun dealers.

Its the actual stud im after now the Sling swivel

skipking · 22-02-2015 10:23pm

jack pike swivel stud or deben or bisley stud on ebay for around 5 euro.

Wadi14 · 22-02-2015 10:29pm

Is it the stud is too slim or is it a case of the diameter of the hole in the stud is too small, check it out, if its the hole diameter drill it out with the appropriate drill bit size and it will work, if its a stud you need any of the big online international firearm and accessories dealers sell them, or ebay http://www.ebay.ie/itm/Jack-Pyke-1-Quick-Release-Air-Rifle-Sling-Swivels-and-Wood-Studs-/390827245184?pt=LH_DefaultDomain_3&hash=item5aff1e7e80

skipking · 22-02-2015 10:43pm

agree with wadi14 i also drilled out set of studs.

garv123 · 23-02-2015 11:45am

the stud is too thin for the bipod to tighten on and then the hole in the stud is also too thin for a one of my slings.

will have a look online for them

Shooting Forum - Firearms licencing information

Sling stud problem

Comments