Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.
Asrock Z77 Extreme4 Debugger - Need Help!!
-
15-07-2012 3:48pm#1Originally posted this http://www.boards.ie/vbulletin/forumdisplay.php?f=842 on the off-topic thread, but I probably have a better chance of more responses as a seperate thread
Well, I made sure everything was connected, & turned on pc today. The Asrock splash screen appears briefly (using a Z77 Extreme4), then the standard black screen shoing bios date, the mobo type, cpu type & speed & total ram, followed by :
"UEFI Defaults have been loaded.
Press F2 or DEL to Run Setup
Press F1 to continue"
Obviously I'm posting this as f2, del, or f1 don't seem to do anything.
I checked out the Dr. Debug Led display on the motherboard & I get the code A2 - which according the manual means 'IDE Detect'. Pretty strange since I don't have any IDE devices to the best of my knowledge.
The only Sata drives I have connected are the SSD & DVD drive, & I checked they're both securly connected.
Any ideas?
0
Advertisement