Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

mixer tap/shower question

Options
  • 06-04-2014 5:12pm
    #1
    JuliusCaesar
    Registered Users Posts: 4,882 ✭✭✭


    Hi

    a quick question - my bath has a mixer tap with attached shower unit - the kind where you pull on a knob and the water comes out of the showerhead. It had always trickled out the tap when using the shower but now it's pouring out of the taps, only about half the water coming out of the shower.


    The question is: Is it fixable? or do I need to replace the entire thing?

    Thanks!

    JC
    Tagged:


Comments

  • Options
    #2
    scudo2
    Closed Accounts Posts: 2,008 ✭✭✭scudo2


    Hi JC
    Some taps have a replacable internal O ring on the lever that's used to switch between shower and tap.
    Photo if tap would help + close up photo of lever.
    Thanks again.
    M


  • Options
    #3
    JuliusCaesar
    Registered Users Posts: 4,882 ✭✭✭JuliusCaesar


    Here are two ginormous photos of the mixer tap/shower:

    sy04.jpg

    x08l.jpg


    Hope that is enough to tell you what you need to know! :-)


  • Options
    #4
    scudo2
    Closed Accounts Posts: 2,008 ✭✭✭scudo2


    JuliusCaesar wrote: »
    Here are two ginormous photos of the mixer tap/shower:

    sy04.jpg

    x08l.jpg


    Hope that is enough to tell you what you need to know! :-)

    Center lever/plunges needs to be unscrewed off mixer. No need to shut off water supply as tap handles do that.
    Check condition of internal O rings on plunger/switch when you remove it.
    Replace worn or broken O ring.
    M.


Advertisement