[wats the craic]

i am thinkin of building a slatted tank of a lean to . but havin a clue how much it would cost . the tank would be about 80ft long 10 ft wide and 8ft deep

[iverjohnston]

Many variables for you to consider, are you just pricing the tank or including creep areas concreted on one side and how big a feed apron?Are you thinking of getting mass concrete walls at the same time? Would you consider going 10 feet deep? 25% more storage for the 10% extra cost ? Ring 4 or 5 contractors, they should be keen in their pricing this year.

[Farmer Pudsey]

Originally Posted by wats the craic

i am thinkin of building a slatted tank of a lean to . but havin a clue how much it would cost . the tank would be about 80ft long 10 ft wide and 8ft deep

Not a lot of slurry storage in a 10' wide tank that is 8' deep. especially if you put a 1 metre of conc back and front. I would check if I have enough storage. If you go 14' all you really pay extra is for the extra 4' of conc in the side walls and a small bit extra for slats.

[Carey7]

I am currently shuttering an 80'x13'x8' it is costing me under £9000 sterling slats to cover it £4000. Tank + slats complete job under £13000. Don't know cost of lean too if any one wants to post a costing for a 5 bay x 3 bay

[kboc]

Originally Posted by Carey7

I am currently shuttering an 80'x13'x8' it is costing me under £9000 sterling slats to cover it £4000. Tank + slats complete job under £13000. Don't know cost of lean too if any one wants to post a costing for a 5 bay x 3 bay

what area are you in?

[Carey7]

Co. Antrim

[tismesoitis]

we doing a 72' tank(4 bay shed with tank 6, out each end) with 14'6" slats. slats inc 2 agitation slats out each end costing 5200. stone approx 1000 steel in tank walls 1950. digger and dump trailer 1200 guy with shuttering who will tie steel and pour tank 3250 concrete approx 4000. total €16600 + vat for tank inc slats hope this helps

[Insp. Harry Callahan]

I got price there from a contractor for a 5 bay slatted shed,lean two type extending from another existing shed. 13 ft wide slats, 8 ft deep, 2 mixing points outside at each end.
shuttered tank and back and side walls.
concreted 13 ft passageway
sliding door at each end
5 galvinised pens and feeding barriers
rest of steel shotblasted and painted
gutterings

all digger work, easy site to dig and to work
price was 32000 euro plus vat for complete job
thoughts on this price appreciated

[stop thelights]

Originally Posted by Insp. Harry Callahan

I got price there from a contractor for a 5 bay slatted shed,lean two type extending from another existing shed. 13 ft wide slats, 8 ft deep, 2 mixing points outside at each end.
shuttered tank and back and side walls.
concreted 13 ft passageway
sliding door at each end
5 galvinised pens and feeding barriers
rest of steel shotblasted and painted
gutterings

all digger work, easy site to dig and to work
price was 32000 euro plus vat for complete job
thoughts on this price appreciated

The price probably isn't too bad but its just I think you feeding passage is away too narrow even its only feeding one side. Need at least 15ft and go 20ft if feeding both sides. Just a tought