[Sparks43]

Right picked up a cheap 360 today and i have the beautiful RRod



3 of them to be exact


White 20gb Hdmi model


My error is 0110 by doing the sync eject thingy

So what is my best option

Xclamp thingy yokey fixy

Rebally smally soldiery yokey dealeys

Towely burny melty thingy

Smash it with a hammer to stop further pain


I have no fear of explosions or electrocution so if there is any other weird options give me a shout

[justryan]

Hi and welcome to the Console Modding forum, the best and longest lasting repair is to reball or replace the GPU, the error code 0110 might suggest a problem with the RAM chips which is rare or it could be a cold solder connection under the GPU leading to one of the RAM chips.

[EnterNow]

Leave it to someone who has reball facilities whould be my advice. Don't touch the x-xlamps, leave the towels iin the bathroom, & maybe look through here

[Sparks43]

Cheers guys

I dont mind if i make a bags of it as i said it is cheap and i would love to be able to do the repair(Or blow it up) with my own 2 hands.

I see this as a learning process

Is it possible to reflow with a standard soldering iron?

Or is there any merit to the xclampfix.

[EnterNow]

Originally Posted by Sparks43

Cheers guys

I dont mind if i make a bags of it as i said it is cheap and i would love to be able to do the repair(Or blow it up) with my own 2 hands.

I see this as a learning process

Is it possible to reflow with a standard soldering iron?

Or is there any merit to the xclampfix.

The problem here is the DIY fixes don't actually exist, it has to be done properly or it will fail again.

A reball needs some serious equipment, as does a reflow. The x-clamp fix doesn't work & only causes more damage in the long run...ultimately ruining your chances of even having it fixed properly.

[Sparks43]

Ah Smeg

Have all the tools ready to go as well

[Sparks43]

Sod it

Im going in

Bareback

[justryan]

[Sparks43]

Nice little bit of kit to take apart (After finding my proper tools )

Took apart and put back together without attempting a fix.


Damaged the case in the opening

But we shall rebuild my 1st 360 that i have named Steve

[joker@]

Only gpu exchange but its not worth to do it anymore.Reball will help same as reflow for a while.

[Jimbobjoeyman]

Why would a gpu exchane be any better than a reball.
You do realize that any GPU chips for sale are used chips pulled from consoles and reballed and then thrown in an ultrasonic cleaner.

I don't see any gain from a GPU exchange maybe except for a dead GPU or a persistent e74.

Correct me if I'm wrong

[joker@]

Originally Posted by Jimbobjoeyman

Why would a gpu exchane be any better than a reball.
You do realize that any GPU chips for sale are used chips pulled from consoles and reballed and then thrown in an ultrasonic cleaner.

I don't see any gain from a GPU exchange maybe except for a dead GPU or a persistent e74.

Correct me if I'm wrong

Do u know that if you throw chipset into ultrasonic cleaner will get piece of s**it cuz it will kill core?
Maybe your source is doing this mean selling refurbished chipsets my doesn't, btw its subject for a alone thread to explain everything